Serving Vancouver, WA
Local contractor in 98663
In Vancouver, WA 98663, our recent projects have improved electrical safety and functionality for homes throughout the area. With a mix of older residences and newer builds, we’ve tackled about thirty upgrades, ensuring that electrical systems meet modern standards. One recent project involved replacing a malfunctioning outlet in a local home, where we identified and repaired a burned connection, restoring power and safety. A satisfied homeowner remarked on our professionalism and efficiency during the service. With the diverse housing styles and the potential for electrical issues, routine maintenance and upgrades are essential to keep homes safe and functional in our community.
Recent projects near 98663
Real work completed for homeowners in Vancouver and the surrounding areas.
Job in Vancouver
To enhance the electrical functionality in the basement, we ran new lines for six outlets, installed one switch, and set up a light box out of an existing circuit. Additionally, we handled the necessary electrical permit for the circuit installation. The work was completed smoothly in Vancouver.
Job in Vancouver
The homeowner's outlets were not functioning properly, which prompted us to investigate the issue. We troubleshot the problem and performed a minor repair, which included resetting the breaker. After our work, the outlets were restored to proper working condition.

Job in Vancouver
An outlet in the kitchen exhibited a smoke smell and an orange glow, prompting immediate action. We replaced the faulty outlet and ensured that the microwave and other connections were functioning correctly. To enhance safety, we installed a new AFCI/GFCI breaker in the panel, recommended replacing older outlets, and evaluated the entire circuit for signs of overheating.

Job in Vancouver
A bathroom exhaust fan needed replacement in Vancouver. We installed a new fan supplied by the customer, ensuring it was properly connected to the existing wiring and ducting. This essential update enhances ventilation, promoting a healthier bathroom environment.

Job in Vancouver
A new electrical upgrade was needed in the basement area. We installed two new outlets in the TV space, including opening the drywall and running wiring through the walls. Additionally, we installed a dual function Siemens afci/gfci breaker to enhance safety. To facilitate cable management, we also added cable access panels next to the outlets, making it easy to conceal HDMI cables.

Job in Vancouver
A panel change was essential to enhance the electrical system's reliability. We replaced the existing 200 amp breaker panel with a new Siemens panel, incorporating a main breaker and all required new breakers. Additionally, we updated the grounding and installed whole home surge protection to meet code standards. The panel was thoroughly labeled for easy identification.

Job in Vancouver
A malfunctioning disposal and broken outlets prompted us to conduct a thorough troubleshooting session. We identified and replaced the faulty switch that was preventing power flow to the disposal. Additionally, we supplied and installed new outlets where necessary to ensure proper functionality. This comprehensive service improved the overall electrical performance in the space.

Job in Vancouver
An assessment of the exterior electrical setup revealed several areas needing attention. To enhance the property’s safety and functionality, we replaced four exterior junction boxes and upgraded the old GFCI outlets with new weather-resistant ones. Additionally, we installed a new light fixture and doorbell button on existing wiring. To finish, we repaired the galvanized steel mast, ensuring all connections were secure and compliant.

Job in Vancouver
A replacement of the existing 200 amp breaker panel was necessary in Vancouver. We installed a new Siemens panel complete with a main breaker and all new breakers. Additionally, we updated the grounding and installed whole home surge protection to comply with code requirements. The panel was thoroughly labeled for ease of use.

Job in Vancouver
To enhance the functionality of a finished basement, we installed new electrical lines for six outlets, one switch, and a light box from an existing circuit. This work involved obtaining the necessary electrical permit for the circuit. The installation aims to ensure reliable power access throughout the basement space, addressing the homeowner's needs for additional electrical outlets.
Job in Vancouver
A power issue prompted us to reset the breaker at the property in Vancouver. We ensured all GFCI outlets are functioning properly after the reset. This service helps maintain electrical safety and reliability for the homeowner.
Job in Vancouver
An outlet in the south of the room had no power, prompting us to investigate the issue. We traced the wires from the outlet back to the junction in the south light box and found two loose connections. We re-established these connections to restore power. The homeowner mentioned plans to replace the box in the future due to its full capacity.

Job in Vancouver
An installation of a new EV charger outlet was carried out to enhance electric vehicle capabilities. We installed a 50 amp EV outlet next to the Siemens panel, ensuring GFCI protection with a Siemens 50 amp GFCI breaker. Additionally, we obtained the necessary electrical permit and patched drywall in the garage to complete the job.
Job in Vancouver
A request for service was completed for Erin Paysse in Vancouver. We focused on addressing the needs outlined for the job. Each aspect of the requested work was effectively managed, ensuring that all tasks were completed to full satisfaction. This job highlights our commitment to quality service and responsiveness.

Job in Vancouver
To meet electrical code requirements, we installed a new 30 amp, 240 volt dryer circuit in Vancouver. This involved running larger wire from the electrical panel to the dryer outlet and replacing the existing breaker with a 30 amp GFCI breaker. Additionally, we set up a four-wire outlet suitable for the dryer, ensuring all work was completed efficiently and safely.

Job in Vancouver
A malfunctioning electrical system prompted us to troubleshoot reverse polarity and non-working outlets in the primary bathroom. We installed GFCI outlets at two locations, including the main hall bathroom, ensuring safety and compliance. Additionally, we replaced an undersized 30 amp breaker with a 20 amp two-pole breaker to protect the wiring effectively. A site visit may be needed to verify the dryer wiring and ensure everything is correctly configured.
Job in Vancouver
A ceiling fan issue prompted a visit to the property in Vancouver. We troubleshot the existing wiring, identifying that one pair of wires was constantly hot due to an old dimmer switch. We replaced the dimmer with a regular switch and installed the customer-supplied ceiling fan on the existing wiring. Additionally, we disposed of the old ceiling fan.
Job in Vancouver
A malfunctioning bathroom fan was identified during our visit. We troubleshot the issue and discovered a loose connection behind the bathroom light fixture. After reestablishing the connection, we ensured that the fan was operating correctly. This service helped restore functionality to the bathroom.

Job in Vancouver
A malfunctioning heater required immediate attention. We troubleshot the Cadet CST402 4000-watt heater and discovered that one half had a burned-out element. The tenant reported that it frequently burned out, so we replaced it with a CST302 3000-watt heater to reduce heat output and extend its lifespan. Authorization was obtained from property management for this preemptive replacement.
Job in Vancouver
A lighting issue in the downstairs primary bathroom prompted us to investigate. The lights were sparking and dim when turned on, despite the tenant's effort to replace the lightbulbs. During our troubleshooting, we discovered that both sets of installed light bulbs were non-dimmable, which caused the flickering. We replaced the bulbs with appropriate ones to resolve the issue.

Job in Vancouver
A damaged electrical outlet required our attention at a property in Vancouver. We replaced three worn-out receptacles that had overheated, posing a potential fire hazard. To enhance safety, we recommended that additional loose receptacles throughout the home be replaced as well. This proactive approach helps ensure the electrical system remains safe and functional.

Job in Vancouver
To support the installation of a sauna, we installed a 30 amp 240 volt circuit approximately 10 feet from the house, directly behind the electrical panel. A disconnect was also added to the house. The trenching required for the circuit to be buried was prepared, while backfill was completed by the homeowner. An electrical permit for this circuit installation was secured, ensuring compliance with local regulations.

Job in Vancouver
A non-functioning kitchen light fixture was our focus during this visit. After confirming that the bulb was in good condition, we proceeded to troubleshoot the issue. We cut back the burnt wires and reconnected them properly. This repair resolved the problem, restoring full functionality to the kitchen light.

Job in Vancouver
A new 50 amp circuit was installed to support an RV outlet, ensuring GFCI protection for safety. Additionally, we secured the necessary electrical permit for the installation. The work was carried out efficiently in Vancouver, providing the homeowner with a reliable power source for their recreational vehicle.

Job in Vancouver
A comprehensive electrical evaluation was performed at the property in Vancouver. We repaired the open neutral issue at the garage outlets and replaced missing and damaged cover plates. Additionally, we addressed a loose light fixture in the dining area and evaluated flickering lights in the kitchen, determining that the bulb was incompatible. We also repaired non-operational lights on the front exterior and secured a loose exterior light fixture. An upgrade project for nearby service wires was discussed, requiring further planning with Clark PUD.

Job in Vancouver
A comprehensive electrical upgrade was carried out to enhance the functionality of the home's electrical system. We installed dedicated 20 amp circuits for specific outlets and numerous new electrical outlets in strategic locations around the house, including the kitchen island, entryway, and exterior areas. The existing outlets were replaced with new GFCI outlets for improved safety, and we remade connections for over 37 outlets throughout the home. Additionally, we installed arc fault breakers to meet code requirements and obtained the necessary permits for the new circuits.
Job in Vancouver
A wall switch for the fireplace was experiencing intermittent issues. We conducted a thorough inspection and found that the wall switch was operating correctly, with the proper voltage supplied to the unit. However, the fireplace unit itself appeared to be dusty and will benefit from maintenance by a heating professional.
Job in Vancouver
A power loss situation was reported, where AFCI breakers could not be reset. We conducted a thorough inspection of the electrical system, identifying and addressing any underlying issues contributing to the problem. Jamie was on site to ensure everything was resolved effectively, restoring power and functionality for the homeowner in Vancouver.
Job in Vancouver
A malfunctioning water dispenser caused the breaker to trip repeatedly. We diagnosed the issue and repaired the electrical components to ensure safe and reliable operation of the dispenser. This resolution allows for the uninterrupted use of the unit moving forward, restoring functionality for the property managed in Vancouver.
Job in Vancouver
A malfunctioning outlet in an office required our immediate attention. We identified that there was a burned connection. To resolve the issue, we replaced the faulty outlet and reset the breaker, ensuring everything was functioning correctly again. This service was successfully completed in Vancouver.
What Vancouver homeowners are saying
A 5★ average rating from 2 verified reviews.
Very professional and communication was excellent! They knew exactly what they were doing with permits, inspections and the actual job Which was replacing an electrical panel. Would highly recommend!
