Serving Vancouver, WA
Local contractor in 98662
In Vancouver, WA 98662, our recent projects have improved electrical safety and functionality for many homes, especially those nestled among the area's lush trees and older neighborhoods. We’ve completed about thirty jobs, focusing on everything from panel upgrades to smoke detector replacements. One recent project involved replacing a 200 amp breaker panel, enhancing the electrical system's performance and ensuring compliance with safety standards. A satisfied customer noted, “It was a great pleasure working with the two gentlemen that performed the service.” With the combination of aging infrastructure and the region's unique weather patterns, routine electrical maintenance is essential for keeping homes safe and efficient.
Recent projects near 98662
Real work completed for homeowners in Vancouver and the surrounding areas.

Job in Vancouver
A fireplace that wouldn’t ignite prompted us to investigate the issue thoroughly. During our troubleshooting, we identified a loose switch as the cause. We replaced the switch to restore functionality to the fireplace, ensuring it is now ready for use.

Job in Vancouver
An old Westinghouse panel required all breakers to be replaced. We efficiently completed the installation, ensuring that the new breakers are functioning correctly and enhancing the overall electrical safety of the property. If you're considering an upgrade or repair of your electrical system, we're here to help.

Job in Vancouver
We encountered two smoke alarms in the bedrooms of a Vancouver property that were displaying internal fault warnings. After assessing the situation, we replaced the expired units and ensured they were functioning correctly. This maintenance helps enhance fire safety within the home, allowing for peace of mind regarding smoke detection reliability.

Job in Vancouver
A request for relocating 1/2" EMT conduit arose as part of a window replacement project. We successfully re-routed the existing conduit on the exterior of the home while reusing the existing wiring. This adjustment was essential to accommodate the new window installation and ensure the structure's functionality.
Job in Vancouver
To enhance the functionality of a residential bathroom, we installed a new 20 amp floor heat circuit, running the necessary wiring over a distance of 30-40 feet. In addition, we swapped out an existing light can and replaced it with a can-less LED light for improved efficiency. A standard timer switch was also installed in place of the regular switch to provide better control. Finally, we secured the necessary electrical permit for the work done.

Job in Vancouver
Transforming a dining room into a bedroom involved a detailed process. We installed new electrical outlets in the newly framed walls and put in smoke and CO detectors to ensure safety. Wiring for a closet light fixture was added, along with moving the bedroom light switch for better accessibility. We also replaced existing smoke detectors and secured necessary permits for the electrical work.
Job in Vancouver
The barn lighting system required an upgrade to improve efficiency and functionality. We replaced all fluorescent bulbs with new LED options, ensuring better illumination. We also removed outdated ballasts, directing wired the bulbs to a 120V setup for a long-term solution. Additionally, we replaced two fixtures facing inward toward the stalls and updated all exterior barn lights as per the chosen models.

Job in Vancouver
A series of electrical issues were reported, including malfunctioning outdoor outlets and a bedroom ceiling fan. We replaced a defective GFCI in the garage, restoring functionality to the outside plugs. Additionally, we adjusted the pull chain on the ceiling fan to ensure it operated smoothly. This troubleshooting and repair work was completed effectively.

Job in Vancouver
A 200 amp breaker panel was replaced to enhance the electrical system's performance. We installed a new Siemens panel, featuring a main breaker and all new breakers, while also updating the grounding system. Whole home surge protection was installed in compliance with code requirements, and the panel was thoroughly labeled. Additionally, we replaced a broken switch and damaged outlet to ensure safety and functionality at the Vancouver property.
Job in Vancouver
A tripped GFCI in the kitchen was preventing proper power supply to an undercabinet light. We identified a loose connection inside the GFCI and replaced it with a new unit. This resolved the issue and ensured consistent power to the kitchen area.
Job in Vancouver
A ceiling fan installation project in Vancouver involved replacing and installing a heavy-duty fan-rated junction box. We installed the customer-supplied ceiling fan using existing wiring and extended a 15 amp circuit from the switch box to the new box. Additionally, we installed a 15 amp Arc Fault breaker in the panel and replaced a non-working outlet with a new GFCI outlet. A dimmer switch was also installed as per the customer's request.

Job in Vancouver
A new electrical outlet was installed in the garage, requiring a 20 amp, 120 volt outlet to be wired approximately 20 feet from the panel. We also installed a ground fault breaker in the panel, ensuring compliance for all garage outlets. The necessary electrical permit was secured for this installation, providing a comprehensive solution for the homeowner in Vancouver.
Job in Vancouver
To enhance the electrical functionality in the kitchen and dining room, we supplied and replaced six outlets. This included two standard and two GFCI outlets in the kitchen, along with two standard outlets in the dining area. The upgrades ensure safe and efficient power access where it is most needed.

Job in Vancouver
A new electrical panel was installed to enhance the home's electrical system. We replaced the existing 100 amp breaker panel with a new Siemens panel, which included a main breaker and all new breakers. Grounding was updated, and whole home surge protection was installed according to code. The panel was thoroughly labeled for easy identification.
Job in Vancouver
A new outlet installation was completed in the bookshelf to enhance the lighting options. We efficiently integrated the customer-supplied outlet into the existing structure, ensuring reliable power supply for lighting fixtures. This work was executed smoothly, aligning with the customer's needs in Vancouver. Jamie handled the installation professionally.
Job in Vancouver
To support the installation of an electric vehicle charger, we installed a 50 amp circuit away from the panel, ensuring it was hardwired into place. We also obtained the necessary electrical permit for this circuit, ensuring compliance with local regulations. This work was performed in Vancouver, facilitating a reliable power source for the customer's EV charger.
Job in Vancouver
A ceiling fan and light issue prompted our visit to a home in Vancouver. During our assessment, we identified a malfunctioning fan control and a stuck pull chain switch for the light. We repaired the pull chain, restoring functionality to the light. However, the fan itself needs replacement to ensure it operates correctly.
Job in Vancouver
After assessing the situation, we inspected the electrical connections in areas affected by water damage. We focused on ensuring there were no signs of moisture in ceiling lights, smoke detectors, outlets, or switches in the bedroom and garage. Additionally, we identified that the moisture mitigation equipment's high power draw could cause breakers to trip if used excessively. We ensured that everything was functioning normally after our checks.
Job in Vancouver
Troubleshooting an HVAC unit led us to discover that there were no volts at the outlet due to a tripped breaker that wouldn't reset. After carefully removing the wires, we identified that the breaker was faulty and replaced it, restoring power to the unit. The job was successfully completed in Vancouver.

Job in Vancouver
A need for updated safety measures led us to replace the smoke detectors at a property in Vancouver. We efficiently removed the old units and installed new, reliable detectors, ensuring compliance with safety standards. This important work enhances the fire safety of the property, providing peace of mind for all occupants.
Job in Vancouver
To enhance safety within the property, we replaced smoke detectors as part of Work Order #14902. Each tenant received a new combo unit and smoke detector, ensuring compliance with safety regulations. The task was completed efficiently, reaffirming our commitment to maintaining secure living environments.
Job in Vancouver
A warranty issue prompted us to troubleshoot the electrical system in Vancouver. We methodically examined the components to identify any potential faults and addressed them efficiently. Following our inspection, we ensured everything was functioning properly, providing the homeowner with peace of mind regarding their electrical system's reliability.

Job in Vancouver
To accommodate the needs for powering an outdoor screen, we installed a dedicated electrical outlet. This involved extending a standard 15 amp circuit for blind plugs and installing a GFCI breaker to ensure safety. We also obtained the necessary electrical permit for the circuit installation. The work was completed efficiently, allowing for immediate use of the outdoor screen in Vancouver.
Job in Vancouver
A stove that kept tripping the breaker prompted us to troubleshoot the appliance. During our inspection, we discovered that the right back burner was the issue. We checked the wiring and confirmed that the voltage was correct, indicating a faulty heating element or a possible short in the stove top. We recommended repair or replacement for optimal performance.

Job in Vancouver
An upstairs bathroom fan was inoperative, which required attention. We replaced the bath fan motor and installed a new grill to ensure optimal functionality. After completing the work, we returned to confirm everything was operating as desired. The job was completed successfully, providing the homeowner with reliable ventilation in the bathroom.

Job in Vancouver
A new interior 100 amp subpanel was installed for enhanced electrical capacity. We re-routed multiple circuits and added arc fault breakers for safety. A separate subpanel was set up in the shop, along with several 20 amp circuits for outlets and lighting. Additionally, we installed a dedicated 30 amp circuit for a sauna and a hardwired EV charger in the garage, ensuring efficient electrical service throughout the property.

Job in Vancouver
To enhance the functionality of the electrical system, we installed new fans and updated the circuit setup at the property in Vancouver. Our objective was to ensure efficient air circulation and improve overall performance. We methodically carried out the installation, ensuring all components were integrated seamlessly. The work was completed efficiently, providing lasting results for the homeowner.

Job in Vancouver
A request to enhance lighting and control features in a master bath led to the installation of several electrical upgrades. We installed recessed can lighting above the shower, ensuring it was fitted with enclosed trim and a standard bulb. Alongside this, we set up a timer for both the fireplace switch and a programmable timer for the whole house fan. An electrical permit was also secured for the work, ensuring compliance with safety standards.
Job in Vancouver
An issue with the living room outlets prompted us to troubleshoot the electrical system. We discovered that the customer had replaced an outlet without breaking the switched tab, which affected its functionality. To resolve this, we rewired the outlet and replaced three additional outlets, restoring proper operation.

Job in Vancouver
A home inspection revealed several issues with the electrical panel. We terminated the wire in the panel, installed a screw for the panel cover, and replaced a 30 amp breaker while repositioning it to avoid damaged bussing. We recommend replacing the panel to prevent future problems. This maintenance ensures the electrical system remains safe and functional.
What Vancouver homeowners are saying
A 5★ average rating from 6 verified reviews.
Great all-around service from scheduling, to workmanship, to cleanup. I've used Compass Electric twice over the years for home projects and I'll gladly use them again!
Wonderful experience. The crew was professional, friendly, offered good ideas. Extremely clean orderly well organized and careful inside and outside of the building during the entire process. They started with a walk through before starting the project, and then we had finished walk through when job completed. The price was competitive as well and so it was budget friendly.
If you have to spend a lot of money on a service performed it better be well worth it and I have to say this was beyond good, it was excellent. A great pleasure working with the two gentlemen that performed the service and would highly recommend both Compass and their workers.
Great communication with office & owner! Jamie arrived & was kind, professional, cleaned up afterwards & did great work. Highly recommend Compass Electric!
