Serving Battle Ground, WA
Local contractor in 98604
In Battle Ground, WA 98604, our recent projects have improved safety and functionality for homes nestled among the trees. With older properties and varying electrical needs, we’ve completed about sixteen jobs, focusing on everything from lighting upgrades to circuit installations. One recent project involved replacing two exterior lights to enhance outdoor illumination, ensuring both safety and aesthetic appeal for a homeowner in the area. Our efficient installation not only brightened the space but also provided peace of mind. With the combination of heavy tree cover and older electrical systems, routine maintenance and upgrades are essential to keep homes safe and well-lit throughout the year.
Recent projects near 98604
Real work completed for homeowners in Battle Ground and the surrounding areas.
Job in Battle Ground
After identifying issues with the bedroom lights and kitchen plugs, we conducted a thorough troubleshooting session. The symptoms included a pulled chain on the fan that resulted in a shock. To resolve this, we checked the connections at the switch, removed the fan for inspection, and examined the attic for any damaged wiring. Our tests confirmed that all connections were in excellent condition, ensuring safety and functionality.

Job in Battle Ground
To investigate reports of arcing sounds from the electrical panel, we carefully removed the panel cover and examined all connections for any signs of looseness, overheating, or damage. No issues were detected during our inspection. It's possible that an internal breaker made noise due to a heavy load, but there were no such loads present at the time. Please refer to the high-resolution photos for further details.
Job in Battle Ground
An inspection was conducted to finalize the necessary corrections at a property in Battle Ground. During this process, we ensured that all required adjustments were made to meet the standards. This thorough review involved verifying all elements to guarantee compliance and functionality. Rebecca was assigned to oversee this critical phase, delivering accurate results.

Job in Battle Ground
A need for improved outdoor illumination led to our replacement of two exterior lights at a property in Battle Ground. We efficiently installed new fixtures, enhancing the safety and aesthetic appeal of the area. This service was completed seamlessly, ensuring optimal functionality for the homeowner's exterior lighting needs.
Job in Battle Ground
A breaker swap was necessary to enhance the electrical system's functionality. Matt performed the task efficiently, ensuring the new breaker was installed properly to ensure safety and compliance with electrical standards. This work in Battle Ground contributed to the overall reliability of the property's electrical supply.

Job in Battle Ground
A thorough inspection of the electrical system led us to troubleshoot multiple items from the report. We evaluated the breaker panel, installed missing cover plates, and made minor repairs. We also replaced breakers in the panel and sleeved exposed wires under the sink, ensuring everything was securely handled. Jamie was instrumental in completing these tasks efficiently.

Job in Battle Ground
To improve the lighting and functionality in the vanity area, we demoed the wiring for four existing vanity lights and installed new electrical components. This included running a new switch leg to two new light locations and installing new junction boxes. We also installed two customer-supplied vanity light fixtures on the existing wiring after the painting was completed. Additionally, we installed a GFCI and standard receptacle next to the vanity for enhanced accessibility.

Job in Battle Ground
A lighting upgrade required the installation of new hardwired fixtures on either side of the bed, along with two new outlets and a dining area dimmer. We successfully installed the fixtures, established connections for new outlets in the living room and laundry area, and added a dimmer for customizable lighting. The project was completed efficiently, enhancing the functionality of the space.
Job in Battle Ground
An outdoor lighting installation was performed to enhance security around the home. We extended a circuit from a nearby outlet to hardwire two security lights on the corners of the house. This involved obtaining an electrical permit for the safe installation. The result is improved visibility and safety for the property.

Job in Battle Ground
To improve the heating efficiency, we replaced four Cadet heaters in Battle Ground. The process involved removing the old units and installing the new heaters to ensure optimal performance. This upgrade enhances heating comfort throughout the property, providing reliable warmth during the colder months. The work was completed efficiently and effectively.

Job in Battle Ground
A heater was not functioning properly and failed to turn on even after attempts to reset it. We conducted a thorough inspection of the heater system to identify the underlying issue. After diagnosing the problem, we implemented the necessary repairs to restore proper functionality. The heater is now working as intended in Battle Ground.

Job in Battle Ground
To enhance the functionality of the property in Battle Ground, we installed a dedicated 20 amp circuit for the sump pump, ensuring reliable operation. Additionally, we provided GFCI protection at the breaker to meet safety standards. An electrical permit was also secured for the new sump pump circuit, ensuring compliance with local regulations.

Job in Battle Ground
To enhance the kitchen's electrical setup, we rerouted the kitchen power by extending a 20 amp circuit from the dining room outlet through the crawl space to the island plug. We also relocated the dining light to a new location and installed new LED wafer cans in the hall bath shower and outside the laundry room. Additionally, we added a GFCI outlet to the garage sink and disconnected wiring to a switch in the living room, ensuring a safe and functional environment.

Job in Battle Ground
To address a specific issue, we disconnected parts of the system during our visit to Battle Ground. This involved careful handling to ensure that everything was properly managed. Jamie completed the job efficiently, focusing on the necessary components for a safe disconnection. The task was successfully carried out and finalized.
Job in Battle Ground
A comprehensive annual maintenance was performed on an air-cooled standby generator. During this service, we changed the oil and filter, checked the spark plugs, air filter, and battery, replacing components as necessary. We also cleaned the generator inside and out and conducted a functional test on all systems, ensuring voltage and frequency were within proper specifications.

Job in Battle Ground
A new sauna installation led us to run standard electrical circuits. We installed a 40 amp circuit in conduit from the panel to the sauna, including a disconnect and hardwiring the sauna heater. Additionally, we set up three dedicated 20 amp circuits for outlets at the back of the house. These upgrades ensure safe and efficient operation of the sauna and added convenience for outdoor power needs.
